Craft: Sintering

A wholly sintered diamond blade is made by putting the steel core, together with the diamonds and the metal bond materials, into a mold and then sintering it in a sintering furnace equipment. Consequently, the diameter of wholly sintered diamond blades is not very large, normally not more than 400 millimetres (16 in).

If you need larger size, we have welded craft to meet your requirements.

Cutting Methods:

Many blades are designed to operate either wet or dry. However, diamond tools and blades work better when wet, and dry cutting should be limited to situations in which water cannot or should not be used. Water will prevent the blade from overheating, greatly reduce the amount of harmful dust created by cutting, remove the slurry from the cut, and extend the life of the blade, since diamond is unable to withstand the forces involved at the elevated temperatures involved in dry cutting ceramic and abrasive materials, and will be subject to rapid tool wear and possible failure.

If you want continuous, wet cutting is needed, however turbo saw blade, wet or dry cutting is OK, but wet cutting will work better.

Packaging:

Normally, we offer plastic bag + white box. If your quantities can reach 1000pcs, color box is OK. Other package such as blister card, corrugated box, PVC bag, paper box required, please feel free to contact us!

Service:

1. Trial order is accepted. Samples request please contact our sales.
2. Customized service can be achieved. After checking and negotiating, we will try our best to offer you better experience.